Home > Products > Steel Pipe Fittings > High Quality Flange

Products

Forged Welding Neck Flange ASTM A105 For High Pressure

Name: Forged Welding Neck Flange ASTM A105 For High Pressure Manufacturers and Suppliers China - Professional Factory - Wanlei Steel Pipe
Brand: Wanlei Steel Pipe
SKU: 23526145

Welding neck flange can be designed by engineer as project requirement. We also supply welding neck flange meets ASTM, ANSI, EN, DIN, JIS, GOST, GB standard. Especially, ASTM A105 welding neck flange is one of the most popular products. ASTM A105 welding neck flange shall be made from forgings.

Send Inquiry

Description

Tianjin Wanlei Steel Pipe Co., Ltd. is one of the leading manufacturers and suppliers of forged welding neck flange astm a105 for high pressure in China, featured by quality products and low price. If you're going to wholesale durable forged welding neck flange astm a105 for high pressure made in China, welcome to get pricelist and free sample from our factory.

Forged Welding neck flange ASTM A105 for high pressure

ASTM A105 covers forged carbon steel piping components for ambient- and higher-temperature service in pressure systems. Included are flanges, fittings, valves, and similar parts ordered either to dimensions specified by the purchaser or to dimensional standards such as the Mss, ASME, and API. Welding neck flange will be introduced to visitors as follows.

1. ASTM A105 standard information

chemical composition,% by mass
C (MAX)	Mn	P (MAX)	S (MAX)	Si	Cu (MAX)	Ni (MAX)	Cr (MAX)	Mo (MAX)	V (MAX)
0.35	0.60-1.05	0.035	0.040	0.1-0.35	0.40	0.40	0.30	0.12	0.08

Mechanical Properties
Tensile Strength, min, ksi (Mpa)	70 (485)
Yield Strength, min, ksi (Mpa)	36 (250)
Elongation in 2 in or 50mm,min,%: Basic minium elongation for walls 5/16 in(7.9mm) and over inthickness,strip tests	30
When standard round 2-in or 50mm gauge length or smaller proportional sized specimen with the gauge length equal to 4D is used	22
Reduction of area, min, %	30
Hardness, HBW, MAX	187