• Follow us

API 5L PSL2 X42 Elbow

API 5L PSL2 X42 Elbow, 90°elbow, 45°elbow, 180°elbow, Our elbow products Charpy V-Notch impact min value is 27J(Horizontal) and 41J(Longitudinal) in 0℃. However, pipe tested at a lower temperature is also acceptable if it meets all other applicable fracture toughness requirements below.

Description

API 5L PSL2 X42 Elbow


Elbow: LR/SR 45°, 90°, 180°

Material: API 5L PSL2 X42

Size range: from 1/2" to 48"

Type: seamless, welded

Specification: ASME/ANSI B16.9

Surface: sand blasting, varnish painting, pickling, hot dipped galvanized, 3LPE, and others



API 5L PSL2 X42 requirement


Grade
C, Max
Mn, Max
P, Max
S, Max
Ti, Max
Other

PSL2 X42

seamless

0.24
1.30
0.025
0.015
0.04

The sum of the columbium[niobium ], vanadium, and titanium contents shall not

exceed 0.15%.

PSL2 X42

welded

0.22
1.30
0.025
0.015
0.04

Tensile strength, MPa
Yield strength, MPa
Charpy Impact Tests, 0℃
PSL2 X42
414-758
290-496

minimum average (set of three specimens) absorbed energy for each heat based on full size specimens

shall be 20 ft-lb (27 J) for transverse specimens or

30 ft-lb (41 J) for longitudinal specimens

Remark: For each reduction of 0.01% below the specified maximum C content, an increase of 0.05% above the specified maximum Mn content is permissible, up to a maximum of 1.50% for Grades X42 through X52


Elbow Packing

Plastic film for each elbow

From 1/2" to 8"-wooden cases, larger size-wooden pallets



Hot Tags: api 5l psl2 x42 elbow China, manufacturers, suppliers, factory, high quality, buy
Related Products

Feedback