• Follow us
Home > News > Content
Spiral Steel Tube Stacking Principle Requirements
Oct 28, 2016

1, the principle of spiral steel pipe stacking requirements are stable in the palletizing to ensure the safety of the premise, so that by species, specifications palletizing, different varieties of materials to be palletizing, to prevent muddy and mutual erosion;

2, Prohibited in the spiral steel tube stacking around the storage of the role of corrosion of steel products;

3, spiral steel tube stack should be raised at the end of high, strong, smooth, to prevent damp or deformation of materials;

4, the same kinds of materials have been stacked according to storage;

5, open-air spiral steel tube stacked, the following must be a wooden mat or stone, a little tilted stack to facilitate drainage, and pay attention to the material placed straight to prevent bending deformation;

6, spiral pipe stacking height, artificial homework of not more than 1.2m, mechanical work of not more than 1.5m, stack width of not more than 2.5m;

7, stacking and stacking should be left between a certain channel, check the Road is generally 0.5m, depending on the size of the access channel and transport machinery may be, generally 1.5 ~ 2.0m;

8, open-sided piling up angle and channel should be down, that is, mouth down, I-beam should be put up, the I-groove steel surface can not face up, so as to prevent water from rusting;

9, stack at the end of the high, if the warehouse is Xiangyang cement floor, pad height 0.1m can; if the mud, to be padded 0.2 ~ 0.5m. If the open field, cement floor mat height 0.3 ~ 0.5m, sand surface high 0.5 ~ 0.7m.


Previous: No Information

Next: Spiral Steel Pipe Process Characteristics